+1 877-337-9312 | info@arcacoustics.com

    Acoustic Ceiling Treatment

    Through the use of acoustic ceiling treatments, you can target noise concerns while enhancing interior sound and aesthetic finishes.
    Reduce noise in high sound energy areas such as:

    • Commercial buildings
    • Public areas
    • Media spaces
    • Offices
    • Academic institutions and auditoriums

    AVL Systems offer a number of sound absorption products and tailored acoustic insulation solutions designed for ceilings. Their AcousTech™ line of acoustical panels are both decorative and effective at absorbing and controlling sound.

    Showing 1–12 of 24 results


    • AcousTech Pressure Zone Bass Traps convert acoustical energy into air motion by utilizing internally damped select-mass membrane that provides maximum attenuation of low frequency energy.

      AVL’s Bass Traps not only absorb low frequency sound but it also backscatters mid to high fequencies into the room to enhance spaciousness.

      Standard and custom factory tuned pressure zone systems are designed to absorb more bass in the frequency ranges required by the room.

      They are lightweight for ceiling, wall or freestanding installations and are modular and stackable.

      Pressure Zone Bass Traps are ideal for placement at intersecting walls or wall-ceiling corners as they are small enought to fit unobstructively in any room corner while achieving excellent performance.

    • AcousTech™ Ceiling Baffles are decorative and durable high-performance acoustical ceiling products for the control of exessive reverberation and echoes that interfer with the intended use of interior spaces.

    • AcousTech™ high-abuse resistant acoustic panels were designed to be light-weight and decorative while being able to withstand high abuse.

      The abuse protection of these acoustic panels is supplied by a concealed perforated, acoustically transparent co-polymer sheet that is laminated to the face of the core. Edges can be chemically hardened to further resist damage.

      These low frequency acoustic panels can be installed individually or together as a grouping.

    • AcousTech™ Acoustic Fabric Panels are a decorative high perfomance sound absorption panel for interior spaces. These acoustical panels were designed with the intention of controlling excess reverberation and echoes in spaces in which this is undesirable.

    • AcousTech™ high impact and high performance fabric panels were designed to be abuse resistant for spaces that require highly durable materials. These acoustic panels are ideal for controlling excessive reverberation and echoes interfering with the intended use of the interior space.

    • AcousTech™ low frequency panel was designed to absorb low frequencies without removing high frequency energy from the space.

      Their outward appearance resembles a standard panel while all models feature a damped, select-tuned membrane resonator inside that is extremely effective at absorbing sound energy below 150 Hz.

      These low frequency acoustic panels can be installed individually or together as a grouping. In addition, the facings of these panels are tackable.

    • Acoustement 40 is compatible with unpainted concrete, masonry and steel substrates. It can be used as a decorative surfacing material or as a combination of these qualities even in conjunction as a fireproofing material.

      This material is recommended for exterior exposures where resistance to environmental pollution, rain, corrosion, and spalling is required and interior exposures where superior abuse resistance is required.

    • Acoustement Plaster 20 is a gypsum-based formulation that is 100% free from asbestos, mineral fiber polystyrene and cellulose. It can be used as a decorative surfacing material, an acoustically attenuating surfacing material or as a combination of these qualities. This material is recommended for interior applications where abuse resistance, but not contact is required.

    • Acoustement Plaster 40 is a gypsum-based formulation typically applied to drywall substrates. It can be used as a decorative surfacing material, an acoustically attenuating surfacing material or as a combination of these qualities even in conjunction as a fireproofing material. This material is recommended for interior applications where superior abuse resistance is required.

    • AcoustiShell Cloud and Canopy’s curvilinear shape is designed to redirect sound spatially and coherently to audience listeners while maintaining desirable reverberation times.

      The scattering of sound and early reflections by curved shapes overhead improve musical clarity, volume, presence and intelligibility.

    • AVL’s Binary DiSorb ceiling and wall diffuser – absorbers are flat faced or convex face are tuned light-weight, decorative, acoustical control products.

    • AVL’s DiSorb ceiling and wall diffuser – absorber are convex shaped and designed to achieve sound diffusion through their curved surfaces and absorb sound through innovative tuned componentry.


    Showing 1–12 of 24 results

    Top