+1 877-337-9312 | info@arcacoustics.com

Wall Noise Control

Separate and isolate wall systems from the structure to prevent airborne and structure-borne noise from transfering into and out of the space through the use of architectural acoustic materials. PAC-International by ARCACOUSTICS offers excellent solutions for achieving noise reduction in walls through the use of their acoustic isolation clips to decouple the structure. Pyrotek solves common noise and vibration problems through the use of their eco-friendly sound absorber, Reapor, and their Wavebar line of flexible noise barriers.

Showing 1–12 of 18 results


  • Resilient sound isolation clip designed to reduce sound transmissions from both airborne and impact noise in wood, steel or concrete construction for both interior walls and ceilings.

    Regupol SonusClip Data Sheet

     

     

  • Low cost and high performance clip fastens to wood framed, steel framed, CMU, or concrete ceiling systems. The acoustical design load of each isolator is 36 lbs. This clip fastens directly to the framing or structure creating a 1 – ⅝” cavity between the framing and the back of the gypsum board.

  • Designed to be used with wood walls and ceilings where noise control is required. It can be installed directly to the stud or joist, over directly mounted gypsum board, or over an RC-1 system. Minimum cavity of 1-⅝”, maximum of up to 3-⅝”.

  • RSIC-1 Retro is designed for use with any wood, steel or concrete application where noise control is required including wood and steel framed, CMU or concrete wall or ceiling systems. The acoustical design load of each isolator is 36 lbs. This clip fastens directly to the framing or structure creating a 1-⅝” cavity.

  • This line of clips are very versitile and available in a variety of acoustic design loads from 36lbs to 144lbs. Minimum cavity of ½” to 4-½” depending on load capacity requirements. Applications include: dropped ceilings, isolation of garage door motors, garage door rails, speakers, vent fans, recessed lighting, projector mounts, electrical boxes, ceiling fans and even for the decoupling of walls built within other walls.

  • This line of clips are very versitile and available in a variety of acoustic design loads from 36lbs to 144lbs. Minimum cavity of ½” to 4-½” depending on load capacity requirements. Applications include: dropped ceilings, isolation of garage door motors, garage door rails, speakers, vent fans, recessed lighting, projector mounts, electrical boxes, ceiling fans and even for the decoupling of walls built within other walls.

  • This line of clips are very versitile and available in a variety of acoustic design loads from 36lbs to 144lbs. Minimum cavity of ½” to 4-½” depending on load capacity requirements. Applications include: dropped ceilings, isolation of garage door motors, garage door rails, speakers, vent fans, recessed lighting, projector mounts, electrical boxes, ceiling fans and even for the decoupling of walls built within other walls.

  • This line of clips are very versitile and available in a variety of acoustic design loads from 36lbs to 144lbs. Minimum cavity of ½” to 4-½” depending on load capacity requirements. Applications include: dropped ceilings, isolation of garage door motors, garage door rails, speakers, vent fans, recessed lighting, projector mounts, electrical boxes, ceiling fans and even for the decoupling of walls built within other walls.

  • Low cost and high performance clip fastens to wood framed, steel framed, CMU, or concrete ceiling systems. The acoustical design load of each isolator is 36 lbs. This clip fastens directly to the framing or structure creating a 1 – ⅛” cavity between the framing and the back of the gypsum board.

  • Vibro-Band is used as an antivibration intermediate band between base (skirting) boards and the floating wooden floors. It prevents the passage of sound and vibration through the skirt. It is an neccessary accessory in wooden nailed floors, when used with the antivibration mounts Vibro-FM or Vibro-FS in order to prevent lateral transmitted vibrations.

  • VIBRO-EP is an antivibration elastic pad for the vibration control of air-compressors, air conditioning units, pumps, fans, generator sets, cutting machines and more. It is easy to install and suitable for large loads. May be used in multiple layers with the use of a steel plate in between the layers in order to reduce the natural frequency.

  • VIBRO-FM Floor pad isolator has been developed to reduce the impact noise of wooden floors and offers improved sound insulation of light partitions. Can be used in domestic or commercial applications. Ideal for reducing the noise from tranferring from the upper level of a space to the lower level.


Showing 1–12 of 18 results