+1 877-337-9312 | info@arcacoustics.com

‹ Back to previous page

VIBRO-QH Mini

VIBRO-QH Mini is an antivibration hanger with quick connection with the metal profile of ceiling systems. It is a combination of the VIBRO-Mini with a reinforced and modulated galvanized metal suspension hanger.

Categories: ,

Description

Anti-Vibration Hanger for Gypsum Board Ceilings

VIBRO-QH mini is an anti-vibration hanger that can be combined with a suitable reinforced and modulated galvanized metal suspension hanger, offering vibration isolation on sound insulation gypsum board ceilings.

VIBRO-QH Mini has grabbling edges for quick and easy connection with the standard ceiling profiles 60 x 27mm, according to DIN 18182-1. These edges help the adaptation with standard metal profile of the false ceilings so that it can be easily handled. Therefore, the working cost is decreased and it also facilitates the work of the installer.

It can be used as sound insulation false ceiling hanger, quick connection with the metal profile of ceiling systems etc.

Dynamic Characteristics

Maximum Load: 20 kp

Natural Frequency: 15 Hz

Downloads

Product Download #1

Related products

  •
    Quick View
    Ceiling Noise Control RSIC-1.5CRC

    To be used with any joint or concrete application where a dropped drywall ceiling is required. This clip decouples the gypsum board from the floor structure above. Acoustical design load of 36 lbs per isolator. Minimum cavity of 3-½” allows for a chase to hide mechanical ducting and plumbing lines.

  •
    Quick View
    Ceiling Noise Control RSIC-GDS

    This clip has been carefully designed as a garage door isolator to decouple the vibrations from your garage door opener when it is in operation. Acoustical design load of 144 lbs. Comes as 3 different kits: Garage Door Motor Isolator Kit, Garage Door Rail Isolator Kit, and Garage Door Complete Isolation Kit.

  •
    Quick View
    Ceiling Noise Control RSIC-1 ADM Mini Drop in Anchor

    Designed to be used with concrete ceilings where noise control is required. Easy installation involves by drilling a hole in the concrete, inserting the mini drop in anchor, setting with the setting tool and threading in the RSIC-1 ADM. Height can be adjusted by spinning the isolator for a level ceiling.

  •
    Quick View
    Ceiling Noise Control RSIC-DC04X2

    This line of clips are very versitile and available in a variety of acoustic design loads from 36lbs to 144lbs. Minimum cavity of ½” to 4-½” depending on load capacity requirements. Applications include: dropped ceilings, isolation of garage door motors, garage door rails, speakers, vent fans, recessed lighting, projector mounts, electrical boxes, ceiling fans and even for the decoupling of walls built within other walls.