+1 877-337-9312 | info@arcacoustics.com

‹ Back to previous page

VIBRO-SH

VIBRO-SH is a spring hanger for false-ceilings that offers a very low natural frequency. Can be used in several applications like cinemas, studios and theaters.

Categories: ,

Description

Spring Anti-Vibration Hanger for False Ceilings

VIBRO-SH is an anti-vibration hanger for false ceilings. It consists of a metal frame of galvanized sheet, properly formed with lateral strength, steel spring, antivibration rubber element at the bottom of the spring which acts as a sound break and increase isolation efficiency.

VIBRO-SH can be used for antivibration hanging for sound insulating false ceilings, antivibration suspension of pipes, air-ducts, loudspeakers etc.

Dynamic Characteristics

Maximum Load: 25 kp*

Deflection: 25 mm at maximum load

Natural Frequency: 3 Hz at maximum load

Other load range upon request

Downloads

Product Download #1

Related products

  •
    Quick View
    Ceiling Noise Control RSIC-1.5CRC

    To be used with any joint or concrete application where a dropped drywall ceiling is required. This clip decouples the gypsum board from the floor structure above. Acoustical design load of 36 lbs per isolator. Minimum cavity of 3-½” allows for a chase to hide mechanical ducting and plumbing lines.

  •
    Quick View
    Ceiling Noise Control RSIC-SI CRC

    This clip can be mounted to wood and steel framed systems. For mounting to concrete the overhead adapter must be added. Widthstands acoustic design load ratings from 5lbs to 160lbs. Minimum cavity of 1″.

  •
    Quick View
    Ceiling Noise Control VIBRO-3D

    VIBRO-3D is designed to sustain impulsive loads in all the three axis, so its capable to receive high vertical or lateral shocks with minimum danger of destruction.

  •
    Quick View
    Ceiling Noise Control RSIC-V

    Low cost and high performance clip fastens to wood framed, steel framed, CMU, or concrete ceiling systems. The acoustical design load of each isolator is 36 lbs. This clip fastens directly to the framing or structure creating a 1 – ⅛” cavity between the framing and the back of the gypsum board.