+1 877-337-9312 | info@arcacoustics.com

‹ Back to previous page

VIBRO-WS

VIBRO-WS is an antivibration support for gypsumboard partitions. It can be used in recording or rehearsal studio applications, or wherever a floating wall is required. Installed on floor or ceiling metal profiles in correspondace with the c-studs or it can also be installed unified. Free spaces must be filled with sound absorption material.

Categories: ,

Description

Anti-vibration Rubber Supports for Gypsum Board Partitions

VIBRO-WS is a homogeneous rubber support system for gypsumboard partitions. The semi-cylindrical modulation at their base and the transversal holes provide the necessary space for the rubber expansion to increase the deflection and consequently the vibration insulation.

VIBRO-WS decreases the flanking noise transmissions and interrupts the heat-bridges and the increase of moisture between humid floors and walls.

Dimensions
VIBRO-WS comes in three different U-runner widths: 50mm, 75mm or 100mm
Fastening
Installed on floor or ceiling metal profiles in correspondance with the C-studs or it can also be installed unified, especially under the U- runner. Can be fixed to the profile with bolts and on the floor or ceiling with expansion bolts. Free spaces must be filled with sound absorption material. The inclined flaps of Vibro-WS cover the fixing bolts on the base and prevent possible contact with gypsumboard. Metal washer must be also used in every fixed point.
Applications
Can be used in recording studios or rehersal studios. Wherever a floating wall is required.

Downloads

Product Download #1

Related products

  •
    Quick View
    Building Foundation Isolation Regufoam® Vibration Isolation

    Regufoam® Vibration offers outstanding internal dampening and low frequency isolation while supplying minimal deflection. Regufoam® Vibration is available in 12 different types, each for a specific load range.

  •
    Quick View
    Vibration Isolation of Floating Floors VIBRO-SC

    VIBRO-SC is an anti-vibration wall connection used in order to add structural integrity of long and tall gypsum board walls, which are mounted on antivibration pads or based on a floating floor. It prevents horizontal vibration transmission and sound-bridges in walls structures. Ideal when space is limited between the isolated wall between the isolated wall and the main building structure as it is only 40mm wide.

  •
    Quick View
    Vibration Isolation of Floating Floors VIBRO-WB

    VIBRO-WB is an anti-vibration wall brace that prevents horizontal vibration transmission and sound-bridges in walls structures. It creates a floating wall as it isolates the wall from the building structure. Commonly used for music studios, home cinemas and acoustically sensitive areas. It prevents the transmission of vibrations and sound bridges.

  •
    Quick View
    Ceiling Noise Control RSIC-DC04

    This line of clips are very versitile and available in a variety of acoustic design loads from 36lbs to 144lbs. Minimum cavity of ½” to 4-½” depending on load capacity requirements. Applications include: dropped ceilings, isolation of garage door motors, garage door rails, speakers, vent fans, recessed lighting, projector mounts, electrical boxes, ceiling fans and even for the decoupling of walls built within other walls.