+1 877-337-9312 | info@arcacoustics.com

‹ Back to previous page

VIBRO-Band

Vibro-Band is used as an antivibration intermediate band between base (skirting) boards and the floating wooden floors. It prevents the passage of sound and vibration through the skirt. It is an neccessary accessory in wooden nailed floors, when used with the antivibration mounts Vibro-FM or Vibro-FS in order to prevent lateral transmitted vibrations.

Categories: ,

Description

Anti-vibration Band for Base (Skirting)-Boards of Floating Wooden Floors

VIBRO-Band is used as an anti-vibration intermediate band between base (skirting) boards and the floating wooden floors. By using VIBRO-Band sound anti-vibration passage through the skirting is prevented.

VIBRO-Band is produced of synthetic rubber.

VIBRO-Band is necessary in wooden nailed floors when used with the anti-vibration mounts VIBRO-FM and VIBRO-FS in order to prevent lateral transmitted vibration.

It is easy to install and allows for the regulation of height and helps avoid the use of the remaining plywood forms. It also creates an air gap which is beneficial for the sound insulation and the vibration control.

Downloads

Product Download #1

Related products

  •
    Quick View
    Ceiling Noise Control RSIC-DC04

    This line of clips are very versitile and available in a variety of acoustic design loads from 36lbs to 144lbs. Minimum cavity of ½” to 4-½” depending on load capacity requirements. Applications include: dropped ceilings, isolation of garage door motors, garage door rails, speakers, vent fans, recessed lighting, projector mounts, electrical boxes, ceiling fans and even for the decoupling of walls built within other walls.

  •
    Quick View
    Vibration Isolation of Floating Floors Regupol® SoundPanel

    Regupol® SoundPanel is a panelized free-floating subfloor system designed to absorb airborne sound and dissipate structure-borne sound and vibration.

     

  •
    Quick View
    Ceiling Noise Control RSIC-V

    Low cost and high performance clip fastens to wood framed, steel framed, CMU, or concrete ceiling systems. The acoustical design load of each isolator is 36 lbs. This clip fastens directly to the framing or structure creating a 1 – ⅛” cavity between the framing and the back of the gypsum board.

  •
    Quick View
    Vibration Isolation of Floating Floors VIBRO-WS

    VIBRO-WS is an antivibration support for gypsumboard partitions. It can be used in recording or rehearsal studio applications, or wherever a floating wall is required. Installed on floor or ceiling metal profiles in correspondace with the c-studs or it can also be installed unified. Free spaces must be filled with sound absorption material.